MOTOYAMA ENG. WORKS, LTD.

Kurimoto, Ltd.

PRODUCTS

CONTROL VALVES

 

Globe Valves

Globe Valve has spherical shape on body, center of valve inlet and outlet lines in straight and has 'S' shape inside the body.

  • Most commonly utilize in control valves.
  • It can be applicable to high temperature and pressure, and to low-noise service. It also be available for cavitation/flashing conditions.
  • Flow characteristic will be available for linear, EQ%, quick opening, etc. depends on shape of plug.

We have variety of product line-ups and all type of valves have many production records and enjoy high reliability. Please nominate adequate valve from our line-ups depends on required application.

 

Comprises 12 products.

Angle Type Valves

The center line of inlet and outlet of Angle Type Valve intersect horizontally and flow direction turns to 90 degree.

  • Application for this valve is to make smooth flow due by its construction(for high viscosity fluids, high density slurry, etc.)
  • It complies with high temperature, high pressure, low noise application and also cavitation/flashing conditions.
  • It applies in order for the connection piping to be installed in vertical position.

Variety of model line-up can be available for each application. Each model has a lot of supply experiences and high reliability. Please nominate adequate valve from our line-ups depends on required application.

 

Comprises 7 products.

Butterfly Valves

Butterfly valve has a disc which rotate on a valve shaft and control the flow.

  • Has economical advantage because of its simple structure and large capacity.
  • A resilient seated valve is available with high anti-erosion ability.
  • Possible to provide low leakage rate.
  • Applicable either as a control or On-Off valve.

Variety of model line-up can be available for each application. Each model has a lot of supply experiences and high reliability. Please nominate adequate valve from our line-ups depends on required application.

 

Comprises 8 products.

Actuators

The principle part, equivalent to the valve body, of the control valve is an actuator. Either globe type or rotary type valve requires the actuator which precisely working by input signal. A spring return diaphragm type actuator is the principle product and cylinder or electrical type are also available.
Please nominate adequate actuator from our line-ups depends on required application.

 

Comprises 6 products.